The Gold Standard In Respiratory Protection
Redefining Safety,
Comfort, and Efficiency
ease of use and cost-effectiveness for hospitals, surgical settings, sterile processing departments, pandemic preparedeness and more.
The Gold Standard In
Respiratory Protection
MAXAIR® CAPR®
Redefining Safety,
Comfort, and Efficiency
MAXAIR® CAPR® delivers unparalled protection
with unmatched ease of use and
cost-effectiveness for hospitals, surgery,
sterile processing, pandemic preparedeness, and more.
Over Two Decades of devotion to
Innovative Respiratory Protection
For more than 20 years, MAXAIR® Systems has been a leader in advanced-design powered air-purifying respirators (PAPRs), trusted across healthcare, surgical, and industrial environments. Our CAPR® Systems offer comprehensive solutions for protection against particulates, splashes, and fluids— from surgery to pandemic response, and from bio-research labs to restoration.
MAXAIR® CAPR® Advantages
Safety
- NIOSH Approved1: OSHA Compliant
- Filtration Efficiency: 99.97% and 99.99%
- High APF Ratings: 25 and 1000
- Fluid Protection: Level 3 and Level 4 Barrier protection
- Source Control: Outward particulate reduction 99% (OPR2)
- No Fit Testing Required: Maintains full performance for all wearer
Comfort
- Lightweight and balanced for comfort even on extended shifts
- Universal fit with no facial pressure points
- Positive pressure system provides cooling effect
- Wide field-of-view and quiet operation for excellent communication
- Cooling airflow automatically defogs lens
- User adjustable airflow reduces heat, moisture, and CO2 buildup
Cost Effective
- Simplifies scheduling; eliminates 'no-fitters'
- Reduces ordering, stocking, and distribution of multiple models & sizes
- One system fits all reduces training and documentation time
- One System with More Configurations meet more needs more efficiently
- Low-cost disposables save time and provide cost effectiveness
- Greater peace-of-mind facilitates staff attendence and retainment
Safety
- NIOSH Approved1: OSHA Compliant
- Filtration Efficiency: 99.97% and 99.99%
- High APF Ratings: 25 and 1000
- Fluid Protection: Level 3 and Level 4 Barrier protection
- Source Control: Outward particulate reduction 99% (OPR2)
- No Fit Testing Required: Maintains full performance for all wearer
Comfort
- Lightweight and balanced for comfort even on extended shifts
- Universal fit with no facial pressure points
- Positive pressure system provides cooling effect
- Wide field-of-view and quiet operation for excellent communication
- Cooling airflow automatically defogs lens
- User adjustable airflow reduces heat, moisture, and CO2 buildup
Cost Effective
- Simplifies scheduling; eliminates 'no-fitters'
- Reduces ordering, stocking, and distribution of multiple models & sizes
- One system fits all reduces training and documentation time
- One System with More Configurations meet more needs more efficiently
- Low-cost disposables save time and provide cost effectiveness
- Greater peace-of-mind facilitates staff attendence and retainment
MAXAIR® CAPR®
Providing Advanced Healthcare
Wherever Needed
Hospital
Healthcare Environments
Preferred Complete Systems For Healthcare Facility Environments
The Personal Protection Equipment needs for Healthcare Workers is as varied as it is extensive.
From frequent Infection Control with infectious patients in Airborne Infection Isolation Rooms (AIIR), to special procedures as bronchoscopy, to emergency preparedness and pandemic critical times, there is an optimum CAPR Configuration.
CAPR focuses on the Health Care Worker and is designed for comfort and convenience to facilitate excellent user compliance with their RPP.
Cuff
For situations requiring the most cost-effective balance between Safety, Comfort, and Convenience.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Shroud
For situations where full 360° coverage and protection of face, head and neck is desired, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 ANSI/AMMI PB70:2020
2APF (1,000)
Hood, PH
When maximum body coverage, high fluid protection, and safety in doffing top the requirements list. A single piece, 360° full head to below-the-shoulders cover for routine use throughout the healthcare facility. Filtered exhaust source control is paramount for protecting the unprotected near the wearer.
Standard Complete System:
- Base System:
- CAPR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PH Style Single Hood
- Front Materials below filter line: AAMI Level 41
- Filter: AATCC 127 50 cm1
- Back materials: AAMI Level 3 with >96% OPR (Source Control)1,2
- No need for additional mask/N95 respirator2
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
HFR FCC Hood, PB
For Ebola and other severe Pandemic Level situations that may require very high fluid resistance (360°) in addition to the highest protection against airborne particulates.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials below filter line: AAMI Level 41
- Filter: AATCC 127 50 cm1
- HFR FCC provides a fluid impermeable cover over the entire Hood Filte
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Hard Hat
For Emergency Preparedness when emergency considerations include requiring respiratory, fluid, and impact protection as with pandemics, terrorist attacks, and natural disasters as tornadoes, earthquakes, explosions, etc.
Standard Complete System:
- Base System:
- CAPR Hard Hat Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- ANSI/ISEA Z98.1-2014 Type 1, Class G & C Hard Hat
- High Fluid Resistant Single Shroud1
- XP Filter2
- Optional ANSI Z87.1 Impact Lens, available)
- DLC Shroud (Optional alternate for Cuff, available)
NIOSH Approved; “NO FIT TESTING REQUIRED”
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 Materials: Level 4, ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Pandemic
Pandemic Environments
Preferred Complete Systems For EMS Environments
The Personal Protection Equipment needs for EMS can be extensive due the varied and often unknown conditions emergency responders must confront.
Need for protection against airborne contaminants, spread of body fluids due to injuries, even impact protection against debris and wreckage are all-in-a-day potentials for EMS situations.
MAXAIR CAPR Complete Systems fit all these needs and more.
Cuff
For situations where the most cost effective full face high protection factor respiratory and contact protection is needed.
Standard Complete System:
- Base System:
- CAPR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Shroud
For emergency situations calling for full 360° coverage and both higher respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 ANSI/AMMI PB70:2020
2APF (1,000)
Hood, PB
For those more extreme emergency situations where a single piece, full 360° coverage, respiratory and fluid protection system is mandatory to allow the peace-of-mind for you to focus completely on your job while under stress.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials: AAMI Level 41
- Optional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Hard Hat
For Emergency Preparedness when emergency considerations include requiring respiratory, fluid, and impact protection as with pandemics, terrorist attacks, and natural disasters as tornadoes, earthquakes, explosions, etc.
Standard Complete System:
- Base System:
- CAPR Hard Hat Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- ANSI/ISEA Z98.1-2014 Type 1, Class G & C Hard Hat
- High Fluid Resistant Single Shroud1
- XP Filter2
- Optional ANSI Z87.1 Impact Lens, available)
- DLC Shroud (Optional alternate for Cuff, available)
NIOSH Approved; “NO FIT TESTING REQUIRED”
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 Materials: Level 4, ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Surgical
Surgery/HOPD/ASC Environments
Preferred Complete Systems For Surgery/OCS/ACS Environments
The Personal Protection Equipment needs for Surgery/OR is as varied as it is extensive.
From frequent Infection Control with infectious patients in Airborne Infection Isolation Rooms (AIIR), to special procedures as bronchoscopy, to emergency preparedness and pandemic critical times, there is an optimum CAPR Configuration.
CAPR focuses on the Health Care Worker and is designed for comfort and convenience to facilitate excellent user compliance with their RPP.
Hood, PRS
For sterile applications requiring maximum body coverage, high fluid protection, and safety in doffing. A single piece, 360° full head to below-the-shoulders cover for all situations requiring sterile technique. Filtered exhaust source control is paramount for protecting the unprotected near the wearer.
Standard Complete System:
- Base System:
- CAPR PR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PRS1 Style Single Hood
- Front Materials below filter line: AAMI Level 42
- Filter: AATCC 127 50 cm2
- Back materials: AAMI Level 3 with >96% OPR (Source Control)2,3
- No need for additional mask/N95 respirator3
Safety with Convenience: NIOSH 99.97%4 HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 Requires CAPR PR Helmet, 2084-04
2 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
2 HIGH APF (1,000)
Hood, PR
For applications requiring maximum body coverage, high fluid protection, and safety in doffing. A single piece, 360° full head to below-the-shoulders cover for all non-sterile head cover situations. Filtered exhaust source control is paramount for protecting the unprotected near the wearer.
Standard Complete System:
- Base System:
- CAPR PR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PR1 Style Single Hood
- Front Materials below filter line: AAMI Level 42
- Filter: AATCC 127 50 cm2
- Back materials: AAMI Level 3 with >96% OPR (Source Control)2,3
- No need for additional mask/N95 respirator3
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 Requires CAPR PR Helmet, 2084-04
2 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
Shroud
For non-sterile applications requiring maximum body coverage, high respiratory protection, and high fluid protection, with a more cost-effective solution. A single piece, 360° full head to below- the-shoulders cover where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 42 outer shroud materials
Safety with Convenience: 99.99%1 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 APF (1,000)
2 ANSI/AMMI PB70:2020
Cuff
For nonsterile situations where the most cost-effective full face high protection factor respiratory and contact protection is needed.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
MAXAIR® CAPR®
Providing Advanced Healthcare
Wherever Needed
Hospital
Healthcare Environments
Preferred Complete Systems For Healthcare Facility Environments
The Personal Protection Equipment needs for Healthcare Workers is as varied as it is extensive.
From frequent Infection Control with infectious patients in Airborne Infection Isolation Rooms (AIIR), to special procedures as bronchoscopy, to emergency preparedness and pandemic critical times, there is an optimum CAPR Configuration.
CAPR focuses on the Health Care Worker and is designed for comfort and convenience to facilitate excellent user compliance with their RPP.
Cuff
For situations requiring the most cost-effective balance between Safety, Comfort, and Convenience.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Shroud
For situations where full 360° coverage and protection of face, head and neck is desired, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 ANSI/AMMI PB70:2020
2APF (1,000)
Hood, PH
When maximum body coverage, high fluid protection, and safety in doffing top the requirements list. A single piece, 360° full head to below-the-shoulders cover for routine use throughout the healthcare facility. Filtered exhaust source control is paramount for protecting the unprotected near the wearer.
Standard Complete System:
- Base System:
- CAPR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PH Style Single Hood
- Front Materials below filter line: AAMI Level 41
- Filter: AATCC 127 50 cm1
- Back materials: AAMI Level 3 with >96% OPR (Source Control)1,2
- No need for additional mask/N95 respirator2
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
HFR FCC Hood, PB
For Ebola and other severe Pandemic Level situations that may require very high fluid resistance (360°) in addition to the highest protection against airborne particulates.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials below filter line: AAMI Level 41
- Filter: AATCC 127 50 cm1
- HFR FCC provides a fluid impermeable cover over the entire Hood Filte
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Hard Hat
For Emergency Preparedness when emergency considerations include requiring respiratory, fluid, and impact protection as with pandemics, terrorist attacks, and natural disasters as tornadoes, earthquakes, explosions, etc.
Standard Complete System:
- Base System:
- CAPR Hard Hat Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- ANSI/ISEA Z98.1-2014 Type 1, Class G & C Hard Hat
- High Fluid Resistant Single Shroud1
- XP Filter2
- Optional ANSI Z87.1 Impact Lens, available)
- DLC Shroud (Optional alternate for Cuff, available)
NIOSH Approved; “NO FIT TESTING REQUIRED”
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 Materials: Level 4, ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Pandemic
Pandemic Environments
Preferred Complete Systems For EMS Environments
The Personal Protection Equipment needs for EMS can be extensive due the varied and often unknown conditions emergency responders must confront.
Need for protection against airborne contaminants, spread of body fluids due to injuries, even impact protection against debris and wreckage are all-in-a-day potentials for EMS situations.
MAXAIR CAPR Complete Systems fit all these needs and more.
Cuff
For situations where the most cost effective full face high protection factor respiratory and contact protection is needed.
Standard Complete System:
- Base System:
- CAPR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Shroud
For emergency situations calling for full 360° coverage and both higher respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 ANSI/AMMI PB70:2020
2APF (1,000)
Hood, PB
For those more extreme emergency situations where a single piece, full 360° coverage, respiratory and fluid protection system is mandatory to allow the peace-of-mind for you to focus completely on your job while under stress.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials: AAMI Level 41
- Optional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Hard Hat
For Emergency Preparedness when emergency considerations include requiring respiratory, fluid, and impact protection as with pandemics, terrorist attacks, and natural disasters as tornadoes, earthquakes, explosions, etc.
Standard Complete System:
- Base System:
- CAPR Hard Hat Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- ANSI/ISEA Z98.1-2014 Type 1, Class G & C Hard Hat
- High Fluid Resistant Single Shroud1
- XP Filter2
- Optional ANSI Z87.1 Impact Lens, available)
- DLC Shroud (Optional alternate for Cuff, available)
NIOSH Approved; “NO FIT TESTING REQUIRED”
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 Materials: Level 4, ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Surgical
Surgery/HOPD/ASC Environments
Preferred Complete Systems For Surgery/OCS/ACS Environments
The Personal Protection Equipment needs for Surgery/OR is as varied as it is extensive.
From frequent Infection Control with infectious patients in Airborne Infection Isolation Rooms (AIIR), to special procedures as bronchoscopy, to emergency preparedness and pandemic critical times, there is an optimum CAPR Configuration.
CAPR focuses on the Health Care Worker and is designed for comfort and convenience to facilitate excellent user compliance with their RPP.
Hood, PRS
For sterile applications requiring maximum body coverage, high fluid protection, and safety in doffing. A single piece, 360° full head to below-the-shoulders cover for all situations requiring sterile technique. Filtered exhaust source control is paramount for protecting the unprotected near the wearer.
Standard Complete System:
- Base System:
- CAPR PR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PRS1 Style Single Hood
- Front Materials below filter line: AAMI Level 42
- Filter: AATCC 127 50 cm2
- Back materials: AAMI Level 3 with >96% OPR (Source Control)2,3
- No need for additional mask/N95 respirator3
Safety with Convenience: NIOSH 99.97%4 HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 Requires CAPR PR Helmet, 2084-04
2 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
2 HIGH APF (1,000)
Hood, PR
For applications requiring maximum body coverage, high fluid protection, and safety in doffing. A single piece, 360° full head to below-the-shoulders cover for all non-sterile head cover situations. Filtered exhaust source control is paramount for protecting the unprotected near the wearer.
Standard Complete System:
- Base System:
- CAPR PR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PR1 Style Single Hood
- Front Materials below filter line: AAMI Level 42
- Filter: AATCC 127 50 cm2
- Back materials: AAMI Level 3 with >96% OPR (Source Control)2,3
- No need for additional mask/N95 respirator3
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 Requires CAPR PR Helmet, 2084-04
2 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
Shroud
For non-sterile applications requiring maximum body coverage, high respiratory protection, and high fluid protection, with a more cost-effective solution. A single piece, 360° full head to below- the-shoulders cover where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 42 outer shroud materials
Safety with Convenience: 99.99%1 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 APF (1,000)
2 ANSI/AMMI PB70:2020
Cuff
For nonsterile situations where the most cost-effective full face high protection factor respiratory and contact protection is needed.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
SPD
SPD Environments
Preferred Complete Systems For Surgery/OCS/ACS Environments
The Personal Protection Equipment needs for Surgery/OR is as varied as it is extensive.
From frequent Infection Control with infectious patients in Airborne Infection Isolation Rooms (AIIR), to special procedures as bronchoscopy, to emergency preparedness and pandemic critical times, there is an optimum CAPR Configuration.
CAPR focuses on the Health Care Worker and is designed for comfort and convenience to facilitate excellent user compliance with their RPP.
Hood, PRS
For sterile applications requiring maximum body coverage, high fluid protection, and safety in doffing. A single piece, 360° full head to below-the-shoulders cover for all situations requiring sterile technique. Filtered exhaust source control is paramount for protecting the unprotected near the wearer.
Standard Complete System:
- Base System:
- CAPR PR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PRS1 Style Single Hood
- Front Materials below filter line: AAMI Level 42
- Filter: AATCC 127 50 cm2
- Back materials: AAMI Level 3 with >96% OPR (Source Control)2,3
- No need for additional mask/N95 respirator3
Safety with Convenience: NIOSH 99.97%4 HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 Requires CAPR PR Helmet, 2084-04
2 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
2 HIGH APF (1,000)
Hood, PR
For applications requiring maximum body coverage, high fluid protection, and safety in doffing. A single piece, 360° full head to below-the-shoulders cover for all non-sterile head cover situations. Filtered exhaust source control is paramount for protecting the unprotected near the wearer.
Standard Complete System:
- Base System:
- CAPR PR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PR1 Style Single Hood
- Front Materials below filter line: AAMI Level 42
- Filter: AATCC 127 50 cm2
- Back materials: AAMI Level 3 with >96% OPR (Source Control)2,3
- No need for additional mask/N95 respirator3
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 Requires CAPR PR Helmet, 2084-04
2 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
Shroud
For non-sterile applications requiring maximum body coverage, high respiratory protection, and high fluid protection, with a more cost-effective solution. A single piece, 360° full head to below- the-shoulders cover where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 42 outer shroud materials
Safety with Convenience: 99.99%1 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 APF (1,000)
2 ANSI/AMMI PB70:2020
Cuff
For nonsterile situations where the most cost-effective full face high protection factor respiratory and contact protection is needed.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
EMS
EMS Environments
Preferred Complete Systems For EMS Environments
The Personal Protection Equipment needs for EMS can be extensive due the varied and often unknown conditions emergency responders must confront.
Need for protection against airborne contaminants, spread of body fluids due to injuries, even impact protection against debris and wreckage are all-in-a-day potentials for EMS situations.
MAXAIR CAPR Complete Systems fit all these needs and more.
Cuff
For situations where the most cost effective full face high protection factor respiratory and contact protection is needed.
Standard Complete System:
- Base System:
- CAPR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Shroud
For emergency situations calling for full 360° coverage and both higher respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 ANSI/AMMI PB70:2020
2APF (1,000)
Hood, PB
For those more extreme emergency situations where a single piece, full 360° coverage, respiratory and fluid protection system is mandatory to allow the peace-of-mind for you to focus completely on your job while under stress.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials: AAMI Level 41
- Optional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Hard Hat
For Emergency Preparedness when emergency considerations include requiring respiratory, fluid, and impact protection as with pandemics, terrorist attacks, and natural disasters as tornadoes, earthquakes, explosions, etc.
Standard Complete System:
- Base System:
- CAPR Hard Hat Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- ANSI/ISEA Z98.1-2014 Type 1, Class G & C Hard Hat
- High Fluid Resistant Single Shroud1
- XP Filter2
- Optional ANSI Z87.1 Impact Lens, available)
- DLC Shroud (Optional alternate for Cuff, available)
NIOSH Approved; “NO FIT TESTING REQUIRED”
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 Materials: Level 4, ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Research / Bio-Labs
Laboratory Research Environments
Preferred Complete Systems For Laboratory Research Environments
Laboratory researchers in BSL laboratories may be exposed to various indigenous and exotic biohazards that can cause serious and lethal disease via airborne transmission. Their studies are invaluable in the ongoing efforts to keep our populations safe from various infectious agents and toxins.
There is an appropriate MAXAIR PPE System to protect these workers commensurate with the type of activity they are performing.
Shroud
For situations calling for full 360° coverage and both respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter2
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 ANSI/AMMI PB70:2020
2HIGH APF (1,000)
Hood, PB
For those “unexpected” and emergency situations when a single piece, full 360° coverage, respiratory and fluid protection system is mandatory to allow the piece-of-mind for you to focus completely on your job.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials: AAMI Level 41
- Filter: AATCC 127 50 cm1
- ptional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency, High APF, High Fluid Resistance
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Cuff
For situations requiring the most cost-effective balance between Safety, Comfort, and Convenience.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unitFull Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Dental
Dental Environments
Preferred Complete Systems For Dental Environments
Respiratory, as well as respiratory and contact protection needs in the Dental field are frequently overlooked and often underestimated.
Many routine and daily procedures as drilling, planing, and cleaning are constantly creating harmful airborne particulates that threaten the long term health of dentists, hygienists, and assistants.
CAPR Cuff and Shroud Complete Systems provide a full range of protection for all Dental application needs.
Cuff
For most Dental cases requiring the most cost-effective balance between Safety, Comfort, and Convenience.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Shroud
For Dental Practitioners with a higher percentage of cases with splash potential that calls for full 360° coverage and both respiratory and fluid protection of face, head and neck. Since filters are protected by the Filter Cover Cap, re-use reduces on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 42 materials
Safety with Convenience: 99.99% Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1HIGH APF (1,000)
2ANSI/AMMI PB70:2020
Restoration
Restoration Environments
Preferred Complete Systems For Restoration Environments
The MAXAIR CAPR Systems and face/head covers, single and double Hoods and Shrouds and Cuffs, provide a comprehensive array of configurations to help protect workers in restoration environments.
Workers are routinely confronted with potential health risks from the dust and other particulates generated and airborne due to processes in numerous restoration situations, including -
- Abatement
- Powder Coating
- Woodworking, Paper and Pulp Operations
- Processing plants for foods, textiles, etc.
- CAFOs
- Metal Finishing
- Construction
- and more
Shroud
For cleanup situations calling for full 360° coverage and both respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 HIGH APF (1,000)
2 ANSI/AMMI PB70:2020
Hood, PB
When some cleanup situations call for even more protection - a single piece covering of the entire Helmet, Head, and Neck for maximum protection, fast and safer donning and doffing, and high levels of fluid resistance.
Standard Complete System:
- Base System:
- CAPR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PH Style Single Hood
- Materials: AAMI Level 41
- Filter: AATCC 127 50 cm1
- Optional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
Cuff
For more common cleanup situations where there is need for the most cost-effective full face high protection factor respiratory and contact protection
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Affordable: Most economical PAPR change-out from user to user
Nuclear
Nuclear Environments
Preferred Complete Systems For Nuclear Environments
MAXAIR CAPR Hood and Hard Hat Configurations are optimized for respiratory protection for use in various activities at Nuclear Power Stations, including scheduled and emergency outages and general maintenance.
CAPR Hard Hat Configurations with optional Impact Lens and Chin Straps provide additional Head and Face impact protection.
Whether refueling only or performing major backfittings or plant modifications, these specialized NIOSH approved PPE system outfits include all the user comfort, convenience, and safety advantages as all MAXAIR Systems.
Hard Hat
For many outage maintenance situations that require respiratory and contact protection against particulate contaminants, and full head and face impact protection when working in awkward spaces.
Standard Complete System:
- Base System:
- CAPR Hard Hat Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- ANSI/ISEA Z98.1-2014 Type 1, Class G & C Hard Hat
- XP Filter1
- Optional ANSI Z87.1 Impact Lens is available
- Optional ANSI Z87.1 Impact Lens, available)
- DLC Shroud, Level 42 (Optional alternate Cuff is available)
NIOSH Approved; “NO FIT TESTING REQUIRED”
Safety with Convenience: 99.99%1 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 HIGH APF (1,000)
2 Materials: Level 4, ANSI/AAMI PB70:2020
Shroud
For situations calling for full 360° coverage and both respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 42 outer shroud materials
Safety with Convenience: 99.99%1 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 HIGH APF (1,000)
2 ANSI/AMMI PB70:2020
Hood, PB
When activities call for even more protection - a single piece covering of the entire Helmet, Head, and Neck for maximum protection, fast and safer donning and doffing, and high levels of fluid resistance.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials: AAMI Level 41
- Filter: AATCC 127 50 cm1
- Optional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: NIOSH 99.97%2 HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
EMS
EMS Environments
Preferred Complete Systems For EMS Environments
The Personal Protection Equipment needs for EMS can be extensive due the varied and often unknown conditions emergency responders must confront.
Need for protection against airborne contaminants, spread of body fluids due to injuries, even impact protection against debris and wreckage are all-in-a-day potentials for EMS situations.
MAXAIR CAPR Complete Systems fit all these needs and more.
Cuff
For situations where the most cost effective full face high protection factor respiratory and contact protection is needed.
Standard Complete System:
- Base System:
- CAPR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Shroud
For emergency situations calling for full 360° coverage and both higher respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 ANSI/AMMI PB70:2020
2APF (1,000)
Hood, PB
For those more extreme emergency situations where a single piece, full 360° coverage, respiratory and fluid protection system is mandatory to allow the peace-of-mind for you to focus completely on your job while under stress.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials: AAMI Level 41
- Optional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Hard Hat
For Emergency Preparedness when emergency considerations include requiring respiratory, fluid, and impact protection as with pandemics, terrorist attacks, and natural disasters as tornadoes, earthquakes, explosions, etc.
Standard Complete System:
- Base System:
- CAPR Hard Hat Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- ANSI/ISEA Z98.1-2014 Type 1, Class G & C Hard Hat
- High Fluid Resistant Single Shroud1
- XP Filter2
- Optional ANSI Z87.1 Impact Lens, available)
- DLC Shroud (Optional alternate for Cuff, available)
NIOSH Approved; “NO FIT TESTING REQUIRED”
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 Materials: Level 4, ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Research / Bio-Labs
Laboratory Research Environments
Preferred Complete Systems For Laboratory Research Environments
Laboratory researchers in BSL laboratories may be exposed to various indigenous and exotic biohazards that can cause serious and lethal disease via airborne transmission. Their studies are invaluable in the ongoing efforts to keep our populations safe from various infectious agents and toxins.
There is an appropriate MAXAIR PPE System to protect these workers commensurate with the type of activity they are performing.
Shroud
For situations calling for full 360° coverage and both respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter2
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 ANSI/AMMI PB70:2020
2HIGH APF (1,000)
Hood, PB
For those “unexpected” and emergency situations when a single piece, full 360° coverage, respiratory and fluid protection system is mandatory to allow the piece-of-mind for you to focus completely on your job.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials: AAMI Level 41
- Filter: AATCC 127 50 cm1
- ptional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency, High APF, High Fluid Resistance
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Cuff
For situations requiring the most cost-effective balance between Safety, Comfort, and Convenience.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unitFull Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Dental
Dental Environments
Preferred Complete Systems For Dental Environments
Respiratory, as well as respiratory and contact protection needs in the Dental field are frequently overlooked and often underestimated.
Many routine and daily procedures as drilling, planing, and cleaning are constantly creating harmful airborne particulates that threaten the long term health of dentists, hygienists, and assistants.
CAPR Cuff and Shroud Complete Systems provide a full range of protection for all Dental application needs.
Cuff
For most Dental cases requiring the most cost-effective balance between Safety, Comfort, and Convenience.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff – Full Face Cover (eyes, nose, mouth)
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Full Face Cover – NO need for separate Face Shields, bouffants, etc.
Affordable: Most economical change-out between uses.
More cost-effective than N95-based programs.
Shroud
For Dental Practitioners with a higher percentage of cases with splash potential that calls for full 360° coverage and both respiratory and fluid protection of face, head and neck. Since filters are protected by the Filter Cover Cap, re-use reduces on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 42 materials
Safety with Convenience: 99.99% Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1HIGH APF (1,000)
2ANSI/AMMI PB70:2020
Restoration
Restoration Environments
Preferred Complete Systems For Restoration Environments
The MAXAIR CAPR Systems and face/head covers, single and double Hoods and Shrouds and Cuffs, provide a comprehensive array of configurations to help protect workers in restoration environments.
Workers are routinely confronted with potential health risks from the dust and other particulates generated and airborne due to processes in numerous restoration situations, including -
- Abatement
- Powder Coating
- Woodworking, Paper and Pulp Operations
- Processing plants for foods, textiles, etc.
- CAFOs
- Metal Finishing
- Construction
- and more
Shroud
For cleanup situations calling for full 360° coverage and both respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 41 materials
Safety with Convenience: 99.99%2 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 HIGH APF (1,000)
2 ANSI/AMMI PB70:2020
Hood, PB
When some cleanup situations call for even more protection - a single piece covering of the entire Helmet, Head, and Neck for maximum protection, fast and safer donning and doffing, and high levels of fluid resistance.
Standard Complete System:
- Base System:
- CAPR Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PH Style Single Hood
- Materials: AAMI Level 41
- Filter: AATCC 127 50 cm1
- Optional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 ANSI/AAMI PB70:2020
2 Syntech Intl Technical Bulletin on OPR, P/N 04123045
Cuff
For more common cleanup situations where there is need for the most cost-effective full face high protection factor respiratory and contact protection
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Standard HE Filter
- Filter Cover Cap
- DLC Cuff
Safety with Convenience: NIOSH 99.97% HE Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - NO breathing tube, no waist mounted blower unit
Affordable: Most economical PAPR change-out from user to user
Nuclear
Nuclear Environments
Preferred Complete Systems For Nuclear Environments
MAXAIR CAPR Hood and Hard Hat Configurations are optimized for respiratory protection for use in various activities at Nuclear Power Stations, including scheduled and emergency outages and general maintenance.
CAPR Hard Hat Configurations with optional Impact Lens and Chin Straps provide additional Head and Face impact protection.
Whether refueling only or performing major backfittings or plant modifications, these specialized NIOSH approved PPE system outfits include all the user comfort, convenience, and safety advantages as all MAXAIR Systems.
Hard Hat
For many outage maintenance situations that require respiratory and contact protection against particulate contaminants, and full head and face impact protection when working in awkward spaces.
Standard Complete System:
- Base System:
- CAPR Hard Hat Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- ANSI/ISEA Z98.1-2014 Type 1, Class G & C Hard Hat
- XP Filter1
- Optional ANSI Z87.1 Impact Lens is available
- Optional ANSI Z87.1 Impact Lens, available)
- DLC Shroud, Level 42 (Optional alternate Cuff is available)
NIOSH Approved; “NO FIT TESTING REQUIRED”
Safety with Convenience: 99.99%1 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety – High Efficiency2, High APF2, High Fluid Resistance1
1 HIGH APF (1,000)
2 Materials: Level 4, ANSI/AAMI PB70:2020
Shroud
For situations calling for full 360° coverage and both respiratory and fluid protection of face, head and neck, and where reuse of filters protected by the Filter Cover Cap can reduce on-going cost-per-use.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- XP Filter1
- Filter Cover Cap
- DLC Single Shroud with Level 42 outer shroud materials
Safety with Convenience: 99.99%1 Filtration Efficiency; “NO FIT TESTING REQUIRED”
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Affordable: Most economical full-coverage change-out between uses
1 HIGH APF (1,000)
2 ANSI/AMMI PB70:2020
Hood, PB
When activities call for even more protection - a single piece covering of the entire Helmet, Head, and Neck for maximum protection, fast and safer donning and doffing, and high levels of fluid resistance.
Standard Complete System:
- Base System:
- CAPR Standard Helmet
- Li-Ion Standard Battery
- Standard Battery Belt
- Battery Charger
- Filter integrated in the Hood
- PB Style Double Hood
- Materials: AAMI Level 41
- Filter: AATCC 127 50 cm1
- Optional HFR FCC provides a fluid impermeable cover over the entire Hood Filter
Safety with Convenience: NIOSH 99.97%2 HE Efficiency; “NO FIT TESTING REQUIRED
Safety with Comfort: Integrated Helmet - No breathing tube, no waist mounted blower unit
Safety with Affordability: Cost competitive full Hood includes New Filter with each changeout
1 ANSI/AAMI PB70:2020
2 HIGH APF (1,000)
Testimonials from those that wear the MAXAIR CAPR
Christiaan
@redbeardrn
Early on in the pandemic, the hospital I was staff at had limited supply of MAXAIR CAPR that they reserved for people who truly failed N95 fit tests. So, I had to shave and wear an N95 most of the time and I sooo missed my beard but especially my CAPR. ...
Frank Guadagnini
CRNA
Before I received my MAXAIR CAPR, I was in fear of exposure to the COVID-19 virus, and risking my life, every moment I was working at the medical center. Initially, we did not have an adequate supply of N95 masks. ...
Alex Coleman
ICU Nurse
My name is Alex and I am an ICU nurse. I used the MAXAIR PAPR for roughly about a year while caring for the massive influx of COVID-19 patients. It was an absolute life saver!! ...
Testimonial - Annissa Coy
Testimonial - Joyce L. deJong
First Impressions - David Hart
News & Blog
Stay ahead of respiratory trends and your competition with our expert inisghts.
Events We Attend
Discover MAXAIR’s gold standard in respiratory protection at our upcoming events.
Visit us to experience premier solutions for healthcare, surgery, pandemic response, and industrial uses.
Engage with excellence
at our next major event
